Produktai skirti cc150s fo 2v 2c (17)

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q4 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 1 kHz. The pulse energy is 2.5 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups. Wavelength:213 nm Pulse energy:2.5 µJ Peakpower:2.5 kW Pulse Width:1 ns Average Power:2.5 mW Repetition Rate:1 kHz Beam diameter:< 0.45 mm Spatial Mode:TEM00 Application:Holography, engraving, photo acoustics, LIBS, mass spectroscopy, photo luminescence

The teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. All standard units are equipped with an energy efficient constant heating control. Depending on the product version a flow rate measurement and control, whose actual value is indicated simultaneously with the actual and nominal values on the colour screen, is installed as standard or is optionally available. Temperature profiles are graphically indicated after selection of the corresponding menu function. On the start page useful functions like limit value monitoring, leak stop operation etc. can be selected. The proven teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. The 95°C series was extended by three versions with higher capacities. The models are designed for larger consumers; they have heating capacities from 18 to 36 kW, cooling capacities from 50 to 120 kW and pump flow rates from 110 to 170 l/min. Display:with touchscreen Type:circulating water Use:cooling,heating,for injection molding machines,process

LKG series is a 105℃ standard level snap in type aluminum electrolyte capacitor that matches following SPEC. 1. LKG standard snap in type aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 2. Size can be customized according to your design. 3. The terminal type is varied from pins to soldering lug according to your design. 4. OEM/ODM is welcomed, can be customized according to your requirement. Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. Place of Origin:Guangdong, China (Mainland) Brand Name:Liron Model Number:LKG2W102MS070K Type:Snap in Aluminum Electrolytic Capacitor, snap in aluminum electrolyte capacitor Application:General Purpose Package Type:Carton Rated Voltage:450V Operating Temperature:-40~85℃ Product name:snap in type aluminum electrolyte capacitor Capacitance:1000μF Load life:2000 hours Size:35*70mm, or as customized ODM service；larger capacitance, bigger size, larger working voltage Rated voltage range:10V～250V | 315V～500V Capacitance tolerance:±20%（20℃，120Hz） Leakage current:1≤0.01CV（μA）or 1.5mA(Whichever is smaller){20℃，after 5 minutes} C=Nominal capacitance (μF) Standard:JIS C 5101-4 Operating Temperature range:-40℃～+105℃ | -25℃～+105℃

Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com.

Tissu 50% COTON 50% POLYESTER COREYARNS, chaine & trame retors, armure toile 1/1 CPT ou RIPSTOP CPRS, 320g/m2, 143cm Principales utilisations support pour toiles de tentes m ilitaires apres traitem ent 3i SH Principales utilisations:support pour toiles de tentes m ilitaires apres traitem ent 3i SH

JBP 50-100

In der Leistungselektronik im allgemeinen, speziell in niederinduktiven Zwischenkreisen höherer Spannungen sowie auch in Entladeschaltungen ist die Forderung nach niederinduktiven Kondensatoren mit Problemen verbunden: Traditionelle Hochspannungskondensatoren sind mit öl gefüllt, und die für die Luft- und Kriechstrecken großzügig auszulegenden Anschlussisolatoren wie auch der interne Sicherheitsmechanismus tragen wesentlich zur Eigeninduktivität des Kondensators bei. Basierend auf jahrzehntelanger eigener Erfahrung bei der Metallisierung von Kondensatorfolien hat ELECTRONICON unter Nutzung spezieller Metallisierungsarten eine Reihe von Hochspannungskondensatoren in selbstheilender Technologie geschaffen. Trotz der hohen Spannungsnennwerte wird die E51 Reihe in trockener Technologie und ohne aufwändige Anschlüsse gefertigt. Das Kondensatorelement im Inneren des Bechers aus selbstverlöschendem Kunststoff ist in PUR-Harz vergossen.

Riparazione e revisione centralina Cpc3 Mercedes.

The ecoHarmony EPC 2.0 Lite is an entry level option in the EPC 2.0 family of EVSE controllers. It is the same form-factor DIN rail mounted module designed for IEC 61851 compliant EV charge points, but simplified for certain applications. The 35mm wide module can support 1 charging outlet; either a socket outlet or a tethered cable, and has an option for 6mA DC leakage detection that help charge point manufacturers and installers meet regulations in a cost-effective way. The IC input allows for configurable charging current as well as enabling access control expansion options with other hardware, including impulse signals to enable charging. It has an internal status indicator LED and support for an external LED.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q1 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 20 kHz. The pulse energy is 0.05 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups. Wavelength:213 nm Pulse energy:0.05 µJ Peakpower:0.05 kW Pulse Width:1 ns Average Power:0.75 mW Repetition Rate:20 kHz Beam diameter:< 0.4 mm Spatial Mode:TEM00 Application:Holography, engraving, photo acoustics, LIBS, mass spectroscopy, photo luminescence

Specification of this Liron LQ2X mini size screw terminal aluminum electrolytic capacitor company Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. LQ2X series is a long lifetime mini capacitor that matches following SPEC. LQ2X long lifetime miniaturization screw terminal aluminum electrolytic capacitor, can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. LQ2X series is the product developed for the purpose of the miniaturization as a capacitor for primary side filters of an inverter, DC servo, and a chopper control circuit. operating Temperature range:-40℃~+85℃ Rated voltage range:400~550V.DC Capacitance tolerance:±20%（20℃，120Hz） Leakage current:0.01CV（μA）or 5 mA,Whichever is smaller [C=Nominal capacitance (μF),V=Rated voltage(V)] Dissipation factor:Less than the value specified in the standard products table. Permissible ripple current:As specified in the standard products table. （85℃，120Hz) Standard:JIS C 5101-4

LKP series is a standard level snap in type aluminum electrolyte capacitor that matches following SPEC. 1. LKP standard snap in type aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 2. Size can be customized according to your design. 3. The terminal type is varied from pins to soldering lug according to your design. 4. OEM/ODM is welcomed, can be customized according to your requirement. Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. Place of Origin:Guangdong, China (Mainland) Brand Name:Liron Model Number:LKP2G471MS045K Type:Snap in Aluminum Electrolytic Capacitor, snap in aluminum electrolyte capacitor Application:General Purpose Package Type:Carton Rated Voltage:400V Operating Temperature:-40~85℃ Product name:snap in type aluminum electrolyte capacitor Capacitance:470μF Load life:2000 hours Size:35*45mm, or as customized ODM service；larger capacitance, bigger size, larger working voltage Rated voltage range:10V～250V | 315V～500V Capacitance tolerance:±20%（20℃，120Hz） Leakage current:1≤0.01CV（μA）or 1.5mA(Whichever is smaller){20℃，after 5 minutes} C=Nominal capacitance (μF) Standard:JIS C 5101-4 Operating Temperature range:-40℃～+85℃ | -25℃～+85℃

JBP 30

LKP series is a standard level snap in type aluminum electrolyte capacitor that matches following SPEC. 1. LKP standard snap in type aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 2. Size can be customized according to your design. 3. The terminal type is varied from pins to soldering lug according to your design. 4. OEM/ODM is welcomed, can be customized according to your requirement. Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. Place of Origin:Guangdong, China (Mainland) Brand Name:Liron Model Number:LKP2G122MS070K Type:Snap in Aluminum Electrolytic Capacitor, snap in aluminum electrolyte capacitor Application:General Purpose Package Type:Carton Rated Voltage:400V Operating Temperature:-40~85℃ Product name:snap in type aluminum electrolyte capacitor Capacitance:1200μF Load life:2000 hours Size:35*70mm, or as customized ODM service；larger capacitance, bigger size, larger working voltage Rated voltage range:10V～250V | 315V～500V Capacitance tolerance:±20%（20℃，120Hz） Leakage current:1≤0.01CV（μA）or 1.5mA(Whichever is smaller){20℃，after 5 minutes} C=Nominal capacitance (μF) Standard:JIS C 5101-4 Operating Temperature range:-40℃～+85℃ | -25℃～+85℃

JBP 15H

Specification of this Liron LP2A smaller size large capacitance screw terminal aluminum electrolytic capacitor company Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. LP2A series is a smaller size larger capacitance product that matches following SPEC. LP2A smaller size larger capacitance screw terminal aluminum electrolytic capacitor, We produce it for UPS power supply and X-ray power supply. operating Temperature range:-25℃~+85℃ Rated voltage range:350~550V.DC Capacitance tolerance:±20%（20℃，120Hz） Leakage current:0.01CV（μA）or 5 mA,Whichever is smaller [C=Nominal capacitance (μF),V=Rated voltage(V)] Dissipation factor:Less than the value specified in the standard products table. Permissible ripple current:As specified in the standard products table.（40℃，120Hz） Standard:JIS C 5101-4

The PK16™ capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filters; with its high energy density it can replace banks of series-connected electrolytic capacitors as well as large film capacitors in rectangular cases. The capacitance in a DC buffer circuit must be sufficiently sized to both handle and smoothen the occurring ripple currents. The traditional use of series-/parallel-connected electrolytic capacitors offered large capacitance at seemingly low cost, however the low cost per microfarad is countered by the very low current strengh, the high sensitivity to voltage and current surges, as well as a substantial risk of failures in the field, resulting in high maintenance cost. Our advanced know-how in special capacitor film coating and many years of practical experience in designing and manufacturing capacitors have allowed us to develop our PK16™ range with high capacitance density.